Dual pulse power supply is the latest generation electroplating power supply product, also known as flat wave/bidirectional pulse adjustable switch power supply; It rectifies the power frequency AC power into a DC high-voltage power supply, generates a low-voltage high current power supply through high-frequency voltage conversion and high-frequency rectification, and then filters it into a pure DC power supply through LC. It is then sent to an asymmetric full bridge conversion circuit (also known as a chopping circuit) to generate an artificial flat wave (i.e. pure DC) or bidirectional pulse square wave output.
The main transformer is an efficient and energy-saving transformer independently developed by Tongke Electric. It uses nanocrystalline soft magnetic materials as the main transformer core, with a large overcurrent area, good cooling effect, excellent coupling, low operating losses, and a service life of more than 10 years; The main power component of the power supply is a high-power original imported Infineon insulated gate bipolar transistor IGBT module, with high-quality material selection to ensure quality. The output mode is full bridge full wave output, PWM control. Using RS-485 protocol for remote control is more convenient than traditional host control, reducing host losses; According to customer needs, LCD touch screens can be selected to avoid button and adjustment knob malfunctions caused by long-term operation in harsh environments. Equipped with five protection methods, including overheating, overcurrent, overvoltage, short circuit, and fault, to minimize the probability of equipment damage.
Double pulse power supply provides finer electroplating and better smoothness than single pulse power supply. The anodic dissolution of the reverse pulse of the dual pulse power supply causes a rapid increase in the depth of metal ions on the cathode surface, which is beneficial for the subsequent cathode cycle to use a high pulse current density, resulting in a dense, bright, and low porosity coating; The anodic stripping of the reverse pulse of the dual pulse power supply greatly reduces the inclusion of organic impurities (including brighteners) in the coating, resulting in high purity and strong color resistance of the coating.
Waveform diagram:
1. Small in size and light in weight, the volume and weight are 1/5-1/10 of those of a thyristor rectifier, with a small footprint and easier mobility.
2. More than 20% energy-saving compared to regular power sources.
3. Adopting cabinet structure, electrostatic spraying protection, beautiful appearance, and sturdy structure.
4. The selection of components has a large margin, strong load-bearing capacity, and long service life.
5. The circuit is highly integrated, with strong anti-interference ability and low failure rate.
6. It has functions such as voltage regulation (constant voltage), current regulation (constant current), soft start, phase loss protection, overvoltage/undervoltage protection, overcurrent protection, overheating protection, etc., ensuring safety issues.
7. High output stability: The system has a fast response speed (microsecond level) and strong adaptability to changes in grid power and load. The output accuracy can be better than ± 0.5%.
8. Equipped with a remote control operation cabinet, it protects the host and extends its service life, with a service life of over 10 years and safe and convenient operation.
enter | rated voltage | three phase four wire 380 vac | |
range | 3 80 v+10% | ||
frequency | 50 hz plus or minus 5% | ||
output | voltage setting range | 0 to customer specified voltage adjustable | |
current setting range | |||
work | constant voltage mode(flow)limited/constant current mode(pressure limiting) (voltage and current double two modes for automatic switching) | ||
PWM switching power supply | |||
voltage regulation accuracy | plus or minus 1%or less | ||
steady flow accuracy | plus or minus 1%or less | ||
control according to | Display content | Running state/fault state/overheating state Display Peak voltage,output current,pulse frequency,positive half-wave duty cycle, | |
operation function | output stop. Output peak setting,output average current setting,pulse frequency setting,positive half wave duty cycle setting, | ||
set the frequency range | 10 hz-100 hz adjustable(or 1 hz-10 hz) | ||
is half-wave duty ratio set range | 0%100% | ||
negative half wave duty ratio set range | 0%100% | ||
peak voltage display accuracy | 0.1 V | ||
current display accuracy | 1 a | ||
frequency display accuracy | 1 HZ(or 0.1 HZ) | ||
duty ratio shows accuracy | 0.1% | ||
input protection | power input overvoltage,undervoltage,short of equal; | ||
output protection | output power over current,short circuit,overload,etc; | ||
thermal protection valve value | 85℃ | ||
comprehensive properties | use | continuous operation 24 h | |
Main components | IGBT adopts Siemens Infineon imported module,reliable and stable. | ||
life | 10 years or more | ||
environmental conditions | 90%or greater(under the condition of rated power) | ||
