The chlorine dioxide electrolysis power supply refers to the power supply used for the electrolytic chlorine dioxide generator. This generator generates a mixture of chlorine dioxide and other oxidants by electrolyzing salt water (sodium chloride solution) or sodium chlorate solution using a DC power source. During the electrolysis process, the anode produces strong oxidants such as chlorine dioxide (ClO2), chlorine gas (Cl2), hydrogen peroxide (H2O2), and ozone (O3), which have strong disinfection and sterilization capabilities.
The power supply of the electrolytic chlorine dioxide generator is usually AC 220V/380V 50Hz, and the adjustment range of the electrolytic current should be greater than 10% of the rated electrolytic current. The generator should ensure the rated output of the equipment under long-term operation, and the safe working time should not be less than 2 hours under working conditions exceeding 10% of the rated output.
This type of equipment is very useful in the field of water treatment and disinfection, especially in hospital sewage treatment, as it can effectively eliminate pathogens, reduce the use of chemical disinfectants, and reduce secondary pollution. In addition, the use of table salt or industrial salt as raw materials avoids the need to store large quantities of explosive and highly corrosive chemicals, thereby improving safety.
1. High integration: Small devices are designed as integrated devices, while medium-sized devices integrate electrodes, power supplies, electric devices, and control systems. Large devices are designed as pry mounted devices.
2. Stable electrical conversion efficiency: A professionally produced regulated switching power supply with high electrical conversion efficiency (greater than or equal to 92%) and low operating heat generation, ensuring stable operation.
3. Energy saving: Intelligent adjustable constant current high-frequency switching electrolytic power supply, small size, energy-saving, can be operated remotely by computer or achieve automatic closed-loop feedback control with online flow meters and residual chlorine online detectors.
4. Easy to operate: High degree of automation, simple operation, easy maintenance, and improved user experience.
5. Safety: Designed with automatic water shortage alarm and shutdown functions, it solves the problem of equipment damage caused by scaling, ensuring long-term safe and stable operation of the equipment.
6. Cost effectiveness: Low operating costs, with a cost of less than 0.10 yuan per ton of medical wastewater disinfection, saving users a lot of costs.
7. Intelligence: Fully digital design, with more precise intelligent control. Supports bus control and can form a central control power supply system, facilitating management and improving efficiency.
8. Environmental protection: No secondary pollutant emissions, no pollution to air, water, and soil, in compliance with current environmental standards.
enter | input:Three-phase to single-phase 220 v/380 v+10%,50 hz plus or minus 10% |
output | the highest voltage:customer specified voltage the highest current:Customer specified current |
voltage regulation accuracy(within the scope of the rating of 10%-100%) | source effect:0.2%rating when drift:0.2%rating temperature drift.0.2%rating load effect:0.5%rating |
accuracy of steady flow(within the scope of the rating of 10%-100%) | source effect:0.2%rating when drift:0.2%rating Temperature drift:0.2%rating Load effect:0.5%rating |
adjust output voltage range | DC0-rating |
output current adjusting range | 0-rating |
protection | current limit,limit pressure,temperature,lack of phase,under-voltage |
over temperature protection | the built-in O.T.P protection,The protection value is 85℃±5%(radiator temperature),Protect closed after output |
voltage current setting | double current voltage regulation(potentiometer) |
control mode | constant voltage/constant current type |
soft starting time adjusting range | 3-120-s |
work | tolerance long-term continuous full load operation run continuously(24 hours) |
power factor | 95%p |
the machine efficiency | 90%p |
the output voltage and current display mode | digital display |
the machine voltage,ampere meter error | 0.5 |
